Konica Minolta AccurioPress 6120 IC-309m2 User Guide - Page 71
Printing a saddle-stitch job, Release the suspended
View all Konica Minolta AccurioPress 6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Printing a saddle-stitch job 63 12. Click the Preview button to preview the layout. The Preview window appears, displaying a schematic representation of your imposition layout.The layout of three columns by eight rows appears with no imposition conflict. 13. Leave the Preview window open, and, if necessary, drag it to the right. 14. Select the Marks parameter. 15. In the Marks list, select Crop marks. The crop marks automatically appear in the Preview window and the Margins setting is automatically increased to accommodate the crop marks. 16. In the Gutter box, type 0.2 inches or 5 mm. The new gutter size automatically appears in the Preview window. The IC-309m2 print controller calculates that to accommodate a gutter of 0.2 inches or 5 mm, a layout of three columns by seven rows will best fit on each sheet. 17. Check the Preview window to make sure that no imposition conflicts appear. 18. In the job parameters window, click Save. 19. Release the suspended Process Queue. Your business cards are processed and printed according to the imposition settings. Printing a saddle-stitch job Use the saddle-stitch imposition method to print two sets of the same job on one printed sheet to save paper and production time. Requirements: This example assumes the following: ● Your job is an eight-page brochure, with a custom trim size of 5.27 by 3.34 inches, or 134 by 85 mm. ● Tabloid or A3 paper is loaded in the printer. 1. In the Storage area, double-click your job. 2. In the job parameters window, click the Imposition tab. 3. In the Method list, select Saddle stitch. 4. In the Sets per sheet list, select 2 to print two sets of your imposed job on one printed sheet. 5. Click the Marks parameter. 6. In the Marks list, select Crop marks.