Konica Minolta AccurioPress C3080 IC-314 User Guide - Page 47

Creating calibration tables with the Konica Minolta FD-9 spectrophotometer 37 14. In the Save Calibration Results area, select if you want the calibration results saved As default name or select Save as, and enter a name for the calibration table in the text box. Note: When you save the calibration table it applies only to the paper type that was calibrated, unless you select to apply it to all paper types, as described in the next step. 15. In the Apply to area, choose if you want the calibration table to apply to All Media Types, or choose Select and select the respective media types to which you want the calibration table to apply. 16. Click Finish. The new calibration table is saved and applied to the next job that prints, provided that the job ticket is programmed to use the paper stock that was calibrated. Creating calibration tables with the Konica Minolta FD-9 spectrophotometer This section describes how to use the Konica Minolta FD-9 spectrophotometer to create calibration tables.