Konica Minolta AccurioPrint C3070L AccurioPress C2070/C3080 Series Daily Maint - Page 129
Press [PrintMode] on the [Maximum Density Adj.] screen, and output the chart from the same tray
View all Konica Minolta AccurioPrint C3070L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
3.6 Details of quality adjustment items 3 26 Change the adjustment value according to the comparative result of the calculated value and the max- imum density target value. % The change value of density differs according to the paper. Reference: The change value of density for POD gloss coat 128g/m2 -Y: Δ0.006/step -M: Δ0.01/step -C: Δ0.013/step -K: Δ0.01/step 27 Press [OK]. 28 Press [Exit [ADJUSTMENT]]. Wait for the display [Now adjusting] to disappear. 29 Press [PrintMode] on the [Maximum Density Adj.] screen, and output the chart from the same tray in step 5. 30 Measure all of the maximum density patch in order of K, C, M, and Y. Repeat the adjustment from step 25 to step 30 until the maximum density is within the acceptable target density range. Acceptable target density range: Y, M, C: from -5% to +5%, K: from -5% to +10% AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L 3-58