Konica Minolta AccurioPrint C3070L AccurioPress C2070/C3080 Series Daily Maint - Page 35
second and third output charts., shown below.
View all Konica Minolta AccurioPrint C3070L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2.5 How to Operate the Both Sides Adj. Item 2 12 Press the number of each point, and use the touch panel keypad to enter the measured length. Press [Clear] to reset the value. 13 When the entry is completed, press [Adjustment Start]. 14 Output the front side adjustment chart again, then check the lengths at points [2], [4], [6], and [8] on the second and third output charts. Repeat steps 11 to 14 until the lengths at points [2], [4], [6], and [8] are included in the respective ranges shown below. [2]: 200 mm ^ 0.3 mm [4]: 200 mm ^ 0.3 mm [6]: 200 mm ^ 0.3 mm [8]: 200 mm ^ 0.3 mm AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L 2-14
2.5
How to Operate the Both Sides Adj. Item
2
AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L
2-14
12
Press the number of each point, and use the touch panel keypad to enter the measured length.
Press [Clear] to reset the value.
13
When the entry is completed, press [Adjustment Start].
14
Output the front side adjustment chart again, then check the lengths at points [2], [4], [6], and [8] on the
second and third output charts.
Repeat steps 11 to 14 until the lengths at points [2], [4], [6], and [8] are included in the respective ranges
shown below.
[2]: 200 mm
^
0.3 mm
[4]: 200 mm
^
0.3 mm
[6]: 200 mm
^
0.3 mm
[8]: 200 mm
^
0.3 mm