Konica Minolta AccurioPrint C3070L AccurioPress C2070/C3080 Series Daily Maint - Page 93
Type 3] of [<Measure Spectrophotometer-3 FD-5 BT>]
View all Konica Minolta AccurioPrint C3070L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
3.6 Details of quality adjustment items 3 1 On the control panel of the main body, press Utility/Counter. The [UTILITY] screen is displayed. 2 Press [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Quality Adjustment] - [Density Balance Adjustment] in sequence. 3 Press [Density Balance Chart Output]. 4 Select the chart to be output according to the spectrophotometer to be used. After the selection, press [Print Mode]. The recommended charts are as follows. - [Type 1] of [] - [Type 3] of [] AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L 3-22
3.6
Details of quality adjustment items
3
AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L
3-22
1
On the
control panel
of the main body, press
Utility/Counter
.
The [UTILITY] screen is displayed.
2
Press [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Quality Adjustment] - [Density
Balance Adjustment] in sequence.
3
Press [Density Balance Chart Output].
4
Select the chart to be output according to the spectrophotometer to be used.
After the selection, press [Print Mode].
The recommended charts are as follows.
- [Type 1] of [<Measure Spectrophotometer-1 (FD-9)>]
- [Type 3] of [<Measure Spectrophotometer-3 (FD-5 BT)>]