Konica Minolta KIP 79 Series KIP 79 Series Hardware User Manual - Page 31
Correct: Fully inserted, NOTE
View all Konica Minolta KIP 79 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
4. Insert each Flange (2) into both ends of the roll media core to be installed. 2 NOTE (1) Fully insert Flange into the roll media core so that the inside rim of Flange evenly touches the side face of the roll media. Inside Rim OK Inside Rim NG Gap Correct: Fully inserted Wrong: not touching roll side (2) Flange has Stoppers (6) with sharp edge. Be sure not to touch them. 6: back 6 2-7 Chapter 2 Basic Operations
Chapter 2
Basic Operations
2-7
4.
Insert each Flange (2) into both ends of the roll media core to be installed.
NOTE
(1) Fully insert Flange into the roll media core so that the inside rim of Flange evenly touches
the side face of the roll media.
Correct: Fully inserted
Wrong: not touching roll side
(2) Flange has Stoppers (6) with sharp edge.
Be sure not to touch them.
2
Inside Rim
Inside Rim
Gap
6
6: back
OK
NG