Konica Minolta Kodak i1860 User Guide - Page 80

Replacement procedures, Replacing the feed module or feed module tires

Get Konica Minolta Kodak i1860 PDF manuals and user guides View all Konica Minolta Kodak i1860 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

Replacement procedures This section provides procedures for replacing the following parts. Use the list below as a guideline for frequency of replacement. • Feed module tires and separation roller tires - tire life will vary depending upon paper types, environment and cleanliness. Nominal tire life is approximately 500,000 documents; results will vary. Degradation of feeder performance, multiple feeds, stoppages, etc. indicate a need to change tires. Change all the tires on the feed module and separation roller at the same time. • Feed module and separation roller - it is recommended that you install a new feed module and separation roller approximately every 4th tire change. Install a new feed module and separation roller at the same time. • Pre-separation pad - it is recommended that you change the preseparation pad at least as often as you change the feed module/ separation roller tires. • Imaging guides - replace when the imaging guides are heavily scratched and defects show in the image. Replacing the feed module 1. Remove the output tray. or feed module tires 2. Lift up the printer access cover. 3. Open the pod. A-61555 March 2007 5-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
A-61555
March 2007
5-15
Replacement
procedures
This section provides procedures for replacing the following parts. Use
the list below as a guideline for frequency of replacement.
•
Feed module tires and separation roller tires
— tire life will vary
depending upon paper types, environment and cleanliness. Nominal
tire life is approximately 500,000 documents; results will vary.
Degradation of feeder performance, multiple feeds, stoppages, etc.
indicate a need to change tires. Change all the tires on the feed
module and separation roller at the same time.
•
Feed module and separation roller
— it is recommended that you
install a new feed module and separation roller approximately every
4th tire change. Install a new feed module and separation roller at the
same time.
•
Pre-separation pad
— it is recommended that you change the pre-
separation pad at least as often as you change the feed module/
separation roller tires.
•
Imaging guides
— replace when the imaging guides are heavily
scratched and defects show in the image.
Replacing the feed module
or feed module tires
1.
Remove the output tray.
2.
Lift up the printer access cover.
3.
Open the pod.