Konica Minolta bizhub 161f bizhub 161f User Guide - Page 206

Using the Utility Mode Chapter 7 7.8 Setting Up the Transmission 7 7.8 Setting Up the Transmission From the "TX OPERATION" menu, various functions for sending faxes can be set. No. TX OPERATION 1 SCAN CONTRAST 2 RESOLUTION 3 DEFAULT TX 4 HEADER Characteristic/Description This function can be used to set the default scanning contrast level to one of five settings between "LIGHT" and "DARK". For dark-colored paper (media), select a setting towards "LIGHT". For faint or colored text, select a setting toward "DARK". This function can be used to set the default scanning resolution (image quality) to one of the following: "Standard", "Fine", "Super Fine", "Half Tone + Standard", "Half Tone + Fine" or "Half Tone + Super Fine". • The manufacturer's default setting is "Standard". This function can be used to set the default transmission mode to "MEM.TX" or "ADF TX". MEM.TX: memory transmission ADF TX: direct transmission • The manufacturer's default setting is "MEM.TX". This function can be used to set the default setting ("ON" or "OFF") for adding the header (date sent, sender's name and fax number, etc.) when sending faxes. This function is not available in the United States. • The manufacturer's default setting is "ON". Selecting the "TX OPERATION" menu 1 Press the [Utility] key seven times. "TX OPERATION" appears. 2 From the 10-Key Pad, press the key ([1] through [4]) for the "TX OPERATION" function that you wish to set. ❍ The "TX OPERATION" functions are as follows: 1 SCAN CONTRAST 2 RESOLUTION 3 DEFAULT TX 4 HEADER bizhub 161f 7-59