Konica Minolta bizhub 20 bizhub 20 User Guide - Page 31
Tray Use in print mode, Volume settings, Ring volume, Beeper volume
View all Konica Minolta bizhub 20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 3 Tray Use in print mode 3 You can change the default tray the machine will use for printing from your computer. a Press Menu, 1, 6, 3. b Press a or b to choose Tray#1 Only, Tray#2 Only 1, MP Only, MP>T1>T2 1 or T1>T2 1>MP. Press OK. 1 Tray#2 Only or T2 appears only if the optional tray is installed. c Press Stop/Exit. Note • The setting in the printer driver will take priority over the setting made on the control panel. • If the control panel is set to Tray#1 Only, MP Only or Tray#2 Only 1 and you choose Auto Select in the printer driver, the machine pulls the paper from that tray. 1 Tray#2 Only appears only if the optional tray is installed. Volume settings 3 Ring volume 3 You can choose a ring volume level from a range of settings, from High to Off. While in Fax mode press or to adjust the volume level. The LCD will show the current setting, and each key press will change the volume to the next level. The machine will keep the new setting until you change it. You can also change the ring volume through the menu: a Press Menu, 1, 3, 1. b Press a or b to choose Off, Low, Med or High. Press OK. c Press Stop/Exit. Beeper volume 3 When the beeper is on, the machine will beep when you press a key, make a mistake, or after you send or receive a fax. You can choose a range of volume levels, from High to Off. a Press Menu, 1, 3, 2. b Press a or b to choose Off, Low, Med or High. Press OK. c Press Stop/Exit. 22