Konica Minolta bizhub 28e bizhub 28e PaperCut IU Embedded Manual - Page 19

4.3 Authentication Methods PaperCut supports a number of different ways to authenticate users who walk-up to the devices to perform copying. The default authentication method is username and password authentication. The available authentication methods can be modified in the 'External Device Settings -> Authentication methods' section. Authentication methods available for a device Not all authentication methods are supported on all devices. The Identity number option is not supported on Konica Minolta devices. Each authentication method is discussed in the following table. Authentication Method Description Username and password The user may use their domain/network username and password to log into the device. Identity number -> Require PIN When a user logs in with their identification number, they must also provide their associated PIN. This provides additional security for this login method. Swipe card The user may log in by swiping a card (e.g. smart card, RFID card or any other card supported by the device). See the PaperCut user manual for information about user card numbers, including importing card numbers from an external source. Swipe card -> Require PIN When a user logs in by swiping a card, they must also provide their associated PIN. This provides additional security for swipe card logins. Automatically login as Specifies that this device should automatically log in as the given user user. This option overrides all other authentication methods. Description of authentication methods 18 of 27 Copyright © 2019 KONICA MINOLTA BUSINESS SOLUTIONS U.S.A., INC. All Rights Reserved 06/2019