Konica Minolta bizhub 28e bizhub 28e PaperCut IU Embedded Manual - Page 24

6 Uninstalling In order to remove PaperCut Konica Minolta Standard embedded application from the device: 1. PaperCut setting is disabled under Setting>Management 2. After pressing "Close" button, the MFP will reboot automatically. 7 Known Limitations and Security 7.1 PaperCut does not currently support the following Konica Minolta specific features: • PC-fax transmission • TWAIN scanning • Fax forwarding • Archiving • Konica Minolta's native secure print application (Papercut can support secure printing through the Papercut server) 7.2 Waking up the touch screen A device's touch screen is turned off when in energy saving mode. Card swiping an attached card reader logs in to the device, but not all devices are capable of 'waking up' the touch screen without the user pressing the 'Energy Save' hard key. 7.3 Card reader and USB port When one of the supported USB card readers is used on the device the available USB port for scanning to USB memory or printing from USB memory is occupied. If a user wants to use those features, the user can unplug the USB cable of the card reader and plug in the USB memory after they have logged in to the device. 7.4 Use of card reader after returning the device from sleep mode When the device resumes from sleep mode and the power was cut to the USB ports the card reader may be inoperable for a few seconds as the device fully wakes. 23 of 27 Copyright © 2019 KONICA MINOLTA BUSINESS SOLUTIONS U.S.A., INC. All Rights Reserved 06/2019