Konica Minolta bizhub 28e bizhub 28e PaperCut IU Embedded Manual - Page 9
Post Installation Testing
View all Konica Minolta bizhub 28e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2.3.3 Verify Device Creation 1. Select Konica Minolta Device from the list 3 Post Installation Testing After completing installation and basic configuration, we recommend testing some of the common usage scenarios. This is important for two reasons: 1. To ensure that the embedded application is working as expected. 2. To familiarize yourself with the features and functionality of PaperCut and the embedded application. This section outlines four test scenarios that are applicable for most organizations. Please complete all the test scenarios relevant for your site. 3.1 Test Preparation To complete these tests it is recommended you use two test users so that each can be configured differently. These users are: 'testusersimple' - used to perform basic copier monitoring and control and to perform print release tests. 'testuseradvanced' - used to perform copier monitoring and control with account selection enabled (i.e. to charge copying to accounts/departments/cost-centers/etc). To setup these users in PaperCut: 1. Create the 'testusersimple' and 'testuseradvanced' users in your Active Directory or LDAP directory. 2. Login to the PaperCut's admin web interface 3. Go to the "Options->User/Group sync" page and press "Synchronize Now". 4. Once the sync is complete, the users will be added to PaperCut. The next step is to configure the users. To configure 'testusersimple': In PaperCut, select the "Users" tab Select the 'testusersimple' user. 8 of 27 Copyright © 2019 KONICA MINOLTA BUSINESS SOLUTIONS U.S.A., INC. All Rights Reserved 06/2019