Konica Minolta bizhub 4702P bizhub 4702P/4402P User Guide - Page 45
WEP Authentication Mode, Set WEP Key, WPA2/WPA - Personal, Set Pre, Shared Key, 1x Encryption Mode
View all Konica Minolta bizhub 4702P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Understanding the printer menus 45 Menu item WEP Authentication Mode Auto* Open Shared Set WEP Key WPA2/WPA - Personal AES Set Pre‑Shared Key WPA2 - Personal AES 802.1x Encryption Mode WPA+ WPA2* IPv4 Enable DHCP On* Off Set Static IP Address IP Address Netmask Gateway IPv6 Enable IPv6 On* Off Enable DHCPv6 On Off* Stateless Address Autoconfiguration On* Off DNS Server Address Manually Assigned IPv6 Address Manually Assigned IPv6 Router Address Prefix All IPv6 Addresses All IPv6 Router Addresses Network Address UAA LAA Description Set the type of Wireless Encryption Protocol (WEP) used by the printer. Note: This menu item appears only if Wireless Security Mode is set to WEP. Specify a WEP password for secure wireless connection. Enable wireless security through Wi-Fi Protected Access (WPA). Note: This menu item appears only if the Wireless Security Mode is set to WPA2/WPA-Personal or WPA2-Personal. Set the password for secure wireless connection. Enable wireless security through WPA2. Note: This menu item appears only if the Wireless Security Mode is set to WPA2/WPA-Personal or WPA2-Personal. Enable wireless security through 802.1x standard. Note: This menu item appears only if the Wireless Security Mode is set to 802.1x - Radius. Enable and configure IPv4 settings in the printer. Enable and configure IPv6 settings in the printer. View the network addresses.