Konica Minolta bizhub 601 bizhub 751/6510 Box Operations User Manual - Page 227
Error message list
View all Konica Minolta bizhub 601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
Appendix 10 10 10.1 Appendix Error message list If an error message appears, perform the corresponding operation described below. Message Unable to connect to the network. Cause and solution A connection to the network could not be established. Check if the network cable is correctly connected. In addition, check that the "Network Settings" parameters in Administrator mode have been correctly specified. 2 The address for the communication method cannot be selected since the number of addresses has exceeded the maximum allowed for broadcasting. Document could not be saved in user box due to insufficient HDD capacity. Check log. The number of registered user boxes has reached the max. allowance. The number of documents saved in the User Box has reached its maximum. The number of programmed jobs has reached the max. allowance. Wait until a programmed job is completed. Note For details on the network settings, refer to the User's Guide [Network Administrator]. The number of destinations specified exceeds the number possible for a broadcast transmission. Reduce the number of broadcast destinations, or send the transmission in multiple batches. The hard disk is full. Delete unnecessary data, and then try saving the data again. The number of user boxes that can be registered has reached the maximum number possible. Delete unnecessary user boxes, and then try registering new boxes again. The number of documents that can be saved in a user box has reached the maximum number possible. Delete unnecessary documents, and then try saving the document again. The number of jobs that can be programmed has reached the maximum number possible. Wait until a job has been completed, or delete a current job. 751/601 10-2