Home » Konica Minolta Manuals » Multifunction Devices » Konica Minolta bizhub 601 » Manual Viewer

Konica Minolta bizhub 601 bizhub 751/601 Enlarge Display Operations User Manua - Page 38

Touch the button for the desired settings, and then touch [OK]., Touch [Close]., less

View all Konica Minolta bizhub 601 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Using copy functions 2 3 Touch the button for the desired settings, and then touch [OK]. - If "1 > 2" or "2 > 2" is selected, touch [Output Bind Direction], select the binding position for the copy, and then touch [OK]. - If "Auto" is selected, the binding margin is set at the top or at the left. The binding position is automatically determined according to the orientation of the loaded original. If the original length is 11-11/16 inch (297 mm) or less, a binding position along the long side of the paper is selected. If the original length is more than 11-11/16 inch (297 mm), a binding position along the short side of the paper is selected. 4 Touch [Close]. The Basic screen appears again. 751/601 2-11

Section	Page
Contents	4
1 Before use	8
1.1 Names of control panel parts and their functions	8
1.2 Adjusting the angle of the control panel	10
1.2.1 To adjust the angle of the control panel	10
1.3 Screens in Enlarge Display mode	12
1.3.1 Displaying screens in Enlarge Display mode	12
1.4 Touch panel	14
1.4.1 Touch panel operation	14
1.4.2 Icons that appear in the screen	14
1.4.3 Paper type icons	15
1.4.4 Paper supply icons	16
1.5 Feeding the original	17
1.5.1 Loading the original into the ADF	17
1.5.2 Placing the original on the original glass	18
1.6 Specifying original settings	19
1.6.1 Copying originals of mixed sizes (\	19
1.6.2 Loading folded originals (\	21
1.6.3 Selecting the original orientation (Original Direction settings)	23
1.6.4 Selecting the position of the binding margin (Original Binding Position/Binding Position settings)	25
2 Using copy functions	29
2.1 General copy operation	29
2.2 Selecting the Paper settings	31
2.2.1 Automatically selecting the paper size (\	31
2.2.2 Manually selecting the desired paper size	33
2.3 Specifying a Zoom setting	34
2.3.1 Selecting a zoom ratio	35
2.4 Selecting original and copy settings	36
2.4.1 Selecting single-sided or double-sided copies	37
2.5 Selecting a combined copy setting	39
2.6 Selecting Finishing settings	41
2.6.1 Selecting the finishing method	42
2.6.2 Selecting Staple/Punch settings	43
2.6.3 Selecting a folding or binding setting	45
2.7 Selecting not to rotate the image	47
2.8 Selecting the quality of the original	48
2.9 Selecting the density settings	50
2.9.1 Adjusting the print density (Density settings)	50
2.9.2 Adjusting the background density (Background Removal settings)	51
2.10 Selecting the Paper settings	53
2.10.1 Selecting a Paper Type setting for the bypass tray	53
2.10.2 Selecting a Paper Size setting for the bypass tray	56
2.11 Scanning the next original to be copied while a copy job is being printed (next job reservation)	59
2.12 Pausing scanning/printing	60
2.13 Printing a proof to check the settings (Proof Copy)	61
3 Using fax/scan functions	64
3.1 General fax/scan operation	64
3.2 Specifying a destination	66
3.2.1 Selecting a destination from the address book	67
3.2.2 Selecting a destination from the job log	69
3.2.3 Selecting a destination with an LDAP search	70
3.2.4 Directly typing in the number	72
3.3 Specifying scanning settings (Scan Settings)	75
3.3.1 Simplex/Duplex	75
3.3.2 Original Type	77
3.3.3 Resolution	79
3.3.4 Density	80
3.3.5 File Type	82
3.3.6 Background Removal	83
3.3.7 Scan Size	85
3.3.8 Original Settings	86
3.4 Using a program	89
3.5 Checking the destinations	91
4 Logging on and logging off	94
4.1 When a logon screen appears	94
4.1.1 When the screen to enter the user name appears	94