Konica Minolta bizhub 601 bizhub 751/601 Enlarge Display Operations User Manua - Page 41

751/601

2-14

Using copy functions

2

2.6

Selecting Finishing settings

Various settings can be selected for sorting and finishing copies fed into the

output tray.

The following Finishing settings are available.

*1

If no finisher is installed and all of the following conditions are met, printed

copies can be fed out and sorted in an alternating crisscross pattern.

–

8-1/2 × 11 or 5-1/2 × 8-1/2-size (A4- or B5-size) paper is used.

–

Paper of the same size and type is loaded with the

w

orientation in one

paper tray and with the

v

orientation in another tray.

–

The "Auto" Paper setting is selected.

–

The "Auto" Paper setting is not selected when the "Mixed Original"

setting is selected.

*2

The Staple settings are available only if the optional finisher is installed.

*3

The Punch settings are available only if the punch kit or Z folding unit is

installed with the optional finisher.

*4

The Half-Fold, Center Staple & Fold and Tri-Folding settings are available

only if the optional Finisher FS-610 is installed.

Setting

Description

Collate (By Set)

Select this setting to separate each set of a multi-page original.

Group

Select this setting to separate the copies of each page in a multi-

page original.

Offset

*1

Select this setting to feed out and sort printed copies in an

alternating crisscross pattern if the sorting conditions are met

when no finisher is installed.

Select this setting to feed out and stack the printed copies on top

of each other with each set shifted to separate it when a finisher

is installed.

Face Up

The copies are output with their front sides facing up.

Staple

*2

Select one of these settings to bind the printed copies with

staples. "Corner" or "2 Position" can be selected.

Punch

*3

Select one of these settings to punch holes in the copies for filing

them.

Half-Fold

*4

Select this setting to fold copies in half before feeding them out.

Center Staple & Fold

*4

Select this setting to staple copies at two places along the center

before feeding them out.

Tri-Fold

*4

Select this setting to fold copies in three before feeding them out.

Z-Fold

*5

Select this setting to fold copies in half along the center, and

additionally mountain-fold one of the halves before feeding them

out.

Section	Page
Contents	4
1 Before use	8
1.1 Names of control panel parts and their functions	8
1.2 Adjusting the angle of the control panel	10
1.2.1 To adjust the angle of the control panel	10
1.3 Screens in Enlarge Display mode	12
1.3.1 Displaying screens in Enlarge Display mode	12
1.4 Touch panel	14
1.4.1 Touch panel operation	14
1.4.2 Icons that appear in the screen	14
1.4.3 Paper type icons	15
1.4.4 Paper supply icons	16
1.5 Feeding the original	17
1.5.1 Loading the original into the ADF	17
1.5.2 Placing the original on the original glass	18
1.6 Specifying original settings	19
1.6.1 Copying originals of mixed sizes (\	19
1.6.2 Loading folded originals (\	21
1.6.3 Selecting the original orientation (Original Direction settings)	23
1.6.4 Selecting the position of the binding margin (Original Binding Position/Binding Position settings)	25
2 Using copy functions	29
2.1 General copy operation	29
2.2 Selecting the Paper settings	31
2.2.1 Automatically selecting the paper size (\	31
2.2.2 Manually selecting the desired paper size	33
2.3 Specifying a Zoom setting	34
2.3.1 Selecting a zoom ratio	35
2.4 Selecting original and copy settings	36
2.4.1 Selecting single-sided or double-sided copies	37
2.5 Selecting a combined copy setting	39
2.6 Selecting Finishing settings	41
2.6.1 Selecting the finishing method	42
2.6.2 Selecting Staple/Punch settings	43
2.6.3 Selecting a folding or binding setting	45
2.7 Selecting not to rotate the image	47
2.8 Selecting the quality of the original	48
2.9 Selecting the density settings	50
2.9.1 Adjusting the print density (Density settings)	50
2.9.2 Adjusting the background density (Background Removal settings)	51
2.10 Selecting the Paper settings	53
2.10.1 Selecting a Paper Type setting for the bypass tray	53
2.10.2 Selecting a Paper Size setting for the bypass tray	56
2.11 Scanning the next original to be copied while a copy job is being printed (next job reservation)	59
2.12 Pausing scanning/printing	60
2.13 Printing a proof to check the settings (Proof Copy)	61
3 Using fax/scan functions	64
3.1 General fax/scan operation	64
3.2 Specifying a destination	66
3.2.1 Selecting a destination from the address book	67
3.2.2 Selecting a destination from the job log	69
3.2.3 Selecting a destination with an LDAP search	70
3.2.4 Directly typing in the number	72
3.3 Specifying scanning settings (Scan Settings)	75
3.3.1 Simplex/Duplex	75
3.3.2 Original Type	77
3.3.3 Resolution	79
3.3.4 Density	80
3.3.5 File Type	82
3.3.6 Background Removal	83
3.3.7 Scan Size	85
3.3.8 Original Settings	86
3.4 Using a program	89
3.5 Checking the destinations	91
4 Logging on and logging off	94
4.1 When a logon screen appears	94
4.1.1 When the screen to enter the user name appears	94

Konica Minolta bizhub 601 bizhub 751/601 Enlarge Display Operations User Manua - Page 41

Selecting Finishing settings, The Half-Fold

Page 41 highlights