Konica Minolta magicolor 1600W magicolor 1600W User Guide - Page 108
Solving Other Problems
View all Konica Minolta magicolor 1600W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Solving Other Problems " To order KONICA MINOLTA consumables, go to www.q-shop.com. Symptom Cause Solution Printer The power cord is not Turn off the printer, confirm that the power is not correctly plugged into power cord is correctly plugged into the on. the outlet. outlet, and then turn on the printer. Something is wrong Plug another electrical appliance into with the outlet con- the outlet and see whether it operates nected to the printer. properly. The power switch is Turn the power switch off (O position), not correctly turned then turn it back to the on (I position). on (I position). The printer is con- Use a power source with the specificanected to an outlet tions listed in appendix A, "Technical with a voltage or fre- Specifications." quency that does not match the printer specifications. Printing takes too much time. The printer is set to a It takes more time to print with special slow printing mode media. When using regular paper, (for example, thick make sure that the media type is set stock). properly in the driver. The printer is set to It takes time for printing to start in power saving mode. power saving mode. The job is very com- Wait. No action needed. plex. A toner cartridge for a Install a KONICA MINOLTA toner different region or an cartridge approved for your specific unapproved toner printer. cartridge is installed. Blank pages One or more of the are printed. toner cartridges are defective or empty. Check the toner cartridges. The image will not print correctly or not at all, if the cartridges are empty. The wrong media is Check that the media type set in the being used. driver matches the media loaded in the printer. Solving Other Problems 7-21