Konica Minolta magicolor 1600W magicolor 1600W User Guide - Page 66
Replacing the Fuser Unit, There are extremely hot parts within the machine. Before replacing
View all Konica Minolta magicolor 1600W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Replacing the Fuser Unit For optimum print quality and performance, use only approved KONICA MINOLTA fuser unit for your specific printer type. 1 Turn off the machine and discon- nect the power cord. Note There are extremely hot parts within the machine. Before replacing the fuser unit, wait about 20 minutes after turning off the machine, and then check that the fusing section has reached room temperature, otherwise, you may get burnt. 2 Open the top cover. " If there is paper in the output tray, remove it, and then fold up the output tray before opening the top cover. Replacing Consumables 5-17
Replacing Consumables
5-17
Replacing the Fuser Unit
For optimum print quality and performance, use only approved KONICA
MINOLTA fuser unit for your specific printer type.
1
Turn off the machine and discon-
nect the power cord.
Note
There are extremely hot parts within the machine. Before replacing
the fuser unit, wait about 20 minutes after turning off the machine,
and then check that the fusing section has reached room
temperature, otherwise, you may get burnt.
2
Open the top cover.
If there is paper in the
output tray, remove it,
and then fold up the out-
put tray before opening
the top cover.