Konica Minolta magicolor 1600W magicolor 1600W User Guide - Page 30
Rotate, Toner, Display Configuration Toner Out Stop - cartridge
View all Konica Minolta magicolor 1600W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
z Change Toner: Used when replacing a toner cartridge. Select this mode, and then click the Rotate Toner button to switch the printer to the Change Toner mode. (Refer to "Replacing a Toner Cartridge" on page 5-5.) z Eject All Toner: Used when removing all toner cartridges. Select this mode, and then click the Rotate Toner button to switch the printer to the Eject All Toner mode. (Refer to "Removing All Toner Cartridges" on page 5-11.) P/H Clean Up-Click the button to switch the printer to the P/H Clean Up mode. Print Head Cleanup mode is a mode that allows the user to clean the print head window more easily. The print head window is not cleaned automatically. (Refer to "Cleaning the Print Head Window" on page 6-8.) " The printer can also be switched to any of these operation modes by pressing the Rotate Toner key on the printer. Refer to "About the Rotate Toner KEY" on page 1-6. Set Default " When the Remote Panel Utility is started up again after it has been exited using the icon in the Windows notification area (right end of the taskbar), the default settings will be displayed. To view the actual set- tings, click the Display Configuration Page button. Apply-Click to send the settings specified for "Toner Low Message", "Toner Out Stop", "Energy Save Time" and "Auto Continue" to the printer. Toner Low Message-Specifies whether a printer indicator blinks or a warning message appears in the status display box of the Remote Panel Utility when toner is about to run out. If Off is selected, neither of these notifications appear when the toner is about to run out. Toner Out Stop-Specifies whether or not printing stops when the toner becomes empty. If Off is selected, printing can continue even if toner has run out. However, the printing results are not guaranteed. If printing is continued, the Error indicator (orange) lights up and printing stops. Energy Save Time-Set time to enter Energy Save mode when no operation is performed. Working with the Remote Panel Utility 3-3