Konica Minolta magicolor 1600W magicolor 1600W User Guide - Page 79

Cleaning the Print Head Window, P/H Clean Up

Page 79 highlights

4 Slowly insert the imaging car- tridge vertically, and then push it slightly down toward you to finish reinstalling the imaging cartridge. 5 Carefully close the top cover. Cleaning the Print Head Window 1 Use either operation described below to switch the printer to Print Head Cleanup mode. z Hold down the Rotate Toner key for 5 to 9 seconds. z On the Panel tab of the Remote Panel Utility, click the P/H Clean Up button. " The printer enters Print Head Cleanup mode, and the magenta toner indicator lights up. " It is not possible to exit Print Head Cleanup mode before the oper- ation is finished (even if the Clear key is pressed). If the printer has incorrectly been switched to Print Head Cleanup mode, perform steps 2 through 4, then steps 10 through 14 (skipping steps 5 through 9) to exit Print Head Cleanup mode. 6-8 Cleaning the Printer

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125

Cleaning the Printer
6-8
4
Slowly insert the imaging car-
tridge vertically, and then push it
slightly down toward you to fin-
ish reinstalling the imaging car-
tridge.
5
Carefully close the top cover.
Cleaning the Print Head Window
1
Use either operation described below to switch the printer to Print Head
Cleanup mode.
Hold down the Rotate Toner key for 5 to 9 seconds.
On the Panel tab of the Remote Panel Utility, click the
P/H Clean Up
button.
The printer enters Print Head Cleanup mode, and the magenta
toner indicator lights up.
It is not possible to exit Print Head Cleanup mode before the oper-
ation is finished (even if the Clear key is pressed).
If the printer has incorrectly been switched to Print Head Cleanup
mode, perform steps 2 through 4, then steps 10 through 14 (skip-
ping steps 5 through 9) to exit Print Head Cleanup mode.