Kyocera ECOSYS M4125idn M4125idn/M4132idn Operation Guide - Page 221

Operation on the Machine > Frequently-Used Sending Method Sending to an Folder on an FTP Server [FTP] You can store the scanned document into the desired shared folder on a computer. NOTE Before sending a document, configure the FTP Client (Transmission). [Protocol Settings] (8-40) 1 [Home] key > [Send] 2 Place the originals. Connecting cable (5-3) 3 On the basic screen for sending, select [Folder]. 4 For the folder type, select [FTP]. 5 Enter the destination information. Enter the next information. After you have completed entry of one item, select [Next] to advance to the next item. Character Entry Method (12-11) The table below explains the items to be entered. Item Host Name*1 Path*2 Login User Name Login Password Data to be entered Host name or IP address of FTP server Path to the receiving folder For example: \User\ScanData Otherwise the data will be saved in the home directory. FTP server login user name FTP server login password (Case sensitive.) Max. No. of Characters Up to 70 characters Up to 128 characters Up to 64 characters Up to 64 characters *1 You can also specify the port number. Enter the following format separated by a colon. When entering "Host Name:Host Number" or the "IP Address;Port Number". IPv6 address, enclose the IPv6 address in square brackets [ ]. (Example: (Example: [2001:db8:a0b:12f0::1]:21) The default port number (21) is used if a port number is not specified. *2 When the FTP server is based on Linux/UNIX, the path including the sub-folder is combined by the slash (/) and not the back-slash(\). 6 Check the status. 1 Check the information. Change if needed. 5-18