Kyocera ECOSYS M4125idn M4125idn/M4132idn Operation Guide - Page 454
The SD Card is not, is off the hook.
View all Kyocera ECOSYS M4125idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 454 highlights
Troubleshooting > Responding to Messages Symptom SSD error. - Checkpoints System error. - Corrective Actions Reference Page An error has occurred on SSD. Job is canceled. Select [End]. The error cords are as follows. 01: The amount of data that can be saved at once has been exceeded. Turn the power OFF/ON. If the error still occurs, divide the file into smaller files. If the error occurs after the file is divided, the specified file may be damaged. Delete the file. 04: Insufficient space on SSD to complete this operation. Move data or delete unneeded data. NOTE Please be aware that when you carry out initialization of the system, the data saved in SSD will be erased. System error has occurred. Follow the instructions on the screen. T Symptom Checkpoints The cover is open. Is there any cover which is open? Is the top cover of the document processor open? Is there any cover which is open? The device cannot be connected because allowed connections would be exceeded. Are three handheld devices connected simultaneously? The manufacturer assumes no responsibility for damage caused by a non-genuine toner. Is the installed toner container our own brand? The phone receiver is off the hook. The SD Card is not formatted. Is the SD Card formatted by this machine? The slit glass - requires cleaning. Corrective Actions Close the cover indicated on the screen. Reference Page - Close the document processor - cover. Close the cover indicated on the screen. Cancel a connection to a portable device that is not being used, or set the machine's auto disconnect time to break portable device connections. We will not be liable for any damage caused by the use of third party supplies in this machine. If you want to continue, select [Next >]. 10-4 Put down the receiver. - Select [Format] from [Common Settings], under [System Menu]. Clean the slit glass using the cleaning cloth supplied with the document processor. 10-2 11-20