Kyocera ECOSYS M4125idn M4125idn/M4132idn Operation Guide - Page 89
Network settings, Configuring the Wired Network - default password
View all Kyocera ECOSYS M4125idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Installing and Setting up the Machine > Network settings Network settings Configuring the Wired Network The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP (IPv4), TCP/IP (IPv6), NetBEUI, and IPSec. It enables network printing on the Windows, Macintosh, UNIX and other platforms. Set up TCP/IP (IPv4) to connect to the Windows network. For other network settings, refer to the following. Configuration Method Description Reference Page Configuring the Connection from the Operation Panel on This Machine Use Quick Setup Wizard when configuring the network in a wizardstyle screen, without setting individually in System Menu. Quick Setup Wizard (225) Configuring Connections on the Web Page For the equipped network interface, the connection can be set by using Command Center RX. For the optional IB-50, the connection can be set by using the dedicated Web page. Command Center RX User Guide IB-50 Operation Guide Setting the Connection by Using the Setup Utility of IB50 This is the setup tool included in the CD of IB-50. You can use it on Windows. IB-50 Operation Guide For other network settings, refer to the following. [Network] (8-32) NOTE If user login administration is enabled, you can only change the settings by logging in with administrator privileges. If user login administration is disabled, the user authentication screen appears. Enter a login user name and password, and select [Login]. The factory default login user name and login password are set as shown below. Login user name ECOSYS M4125idn:2500, ECOSYS M4132idn:3200 Login Password ECOSYS M4125idn:2500, ECOSYS M4132idn:3200 NOTE Ask your network administrator for the IP address in advance, and have it ready when you configure this setting. The following cases, set the IP address of DNS server on the Command Center RX. • When using the host name with [DHCP] setting set to [Off] • When using the DNS server with IP address that is not assigned by DHCP automatically Setting the IP Address of the DNS Server, refer to the following: Command Center RX User Guide 1 Display the screen. [System Menu/Counter] key > [System/Network] > Enter a login user name and password > [Login] > [Network] > [Wired Network Settings] > [TCP/IP Settings] > [IPv4 Settings] 2-13