Kyocera ECOSYS M4125idn M4125idn/M4132idn Operation Guide - Page 88
Setting Date and Time
View all Kyocera ECOSYS M4125idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Installing and Setting up the Machine > Setting Date and Time Setting Date and Time Follow the steps below to set the local date and time at the place of installation. When you send an E-mail using the transmission function, the date and time as set here will be printed in the header of the E-mail message. Set the date, time and time difference from GMT of the region where the machine is used. NOTE To make changes after this initial configuration, refer to the following: [Date/Timer/Energy Saver] (8-56) The correct time can be periodically set by obtaining the time from the network time server. Command Center RX User Guide 1 Display the screen. [System Menu / Counter] key > [Date/Timer/Energy Saver] 2 Configure the settings. Select and set in the order [Time Zone] > [Date/Time] > [Date Format] Item Time Zone Date/Time Date Format Description Set the time difference from GMT. Choose the nearest listed location from the list. If you select a region that utilizes summer time, configure settings for summer time. Set the date and time for the location where you use the machine. If you perform Send as E-mail, the date and time set here will be displayed on the header. Value: Year (2000 to 2037), Month (1 to 12), Day (1 to 31), Hour (00 to 23), Minute (00 to 59), Second (00 to 59) Select the display format of year, month, and date. The year is displayed in Western notation. Value: Month/Day/Year, Day/Month/Year, Year/Month/Day 2-12