Kyocera ECOSYS P6035cdn ECOSYS P6035cdn Operation Guide - Page 100

Printing from PC > Printing Data Saved on the Printer Printing Document from Stored Job Box In Stored Job, the print data sent from the application is saved to the machine. You can set up an access code as necessary. If you set up an access code, enter the access code when printing. Print data will be stored in the Stored Job Box after printing. This will allow printing of the same print data repeatedly. The following operations are possible: Printing the Documents (page 4-12) Deleting the Documents (page 4-13) Printing the Documents Print the documents stored in a Stored Job box. The procedure is as follows. 1 Display the screen. 1 [Document Box] key > [▲] [T] key > [Private/Stored] > [OK] key NOTE If the default screen of the box is set to a Custom Box, display the Job Box screen. [Document Box] key > [Back] key > [▲] [T] key > [Job Box] > [OK] key 2 Select the creator of the document, and select the [OK] key. 2 Print the document. 1 Select the document to print, and [Select] > [OK] key. The file is selected. A checkmark will be placed on the right of the selected file. Checkmarks will be placed on the right of the all files when [All Files] is selected. When all files are checked, all checkmarked files are deselected. Select the checkmarked file and select [Select] again to cancel the selection. 2 [▲] [T] key > [Print] > [OK] key 3 Specify the number of copies to print as desired, and the [OK] key > [Yes]. Printing starts. NOTE If the document is protected by an access code, the password entry screen will be displayed. Enter the password using the numeric keys. 4-12