Kyocera ECOSYS P6035cdn ECOSYS P6035cdn Operation Guide - Page 162

Setup and Registration (System Menu) > System Menu Adjust/Maint. [Menu] key key > [Adjust/Maint.] > [OK] key Adjust printing quality and conduct machine maintenance. Item Quiet Mode Quiet Mode Each Job ColorCalibration Color Regist. Restart Service Setting Description Lower print speed for quiet processing. Set the Quiet Mode. Select this mode when the running noise is uncomfortable. Value: Off, On It is possible to set the use of Quiet Mode for each job. Set whether or not to permit the setting for each job. Value: Permit, Prohibit This machine contains a calibration function that automatically makes adjustments to compensate for changes that occur over time due to variations in the ambient temperature and humidity. This function can be used for fine adjustment of tone and color drift to print in the optimum color. ColorCalibration (page 10-20) If color tone does not improve or color drift does not improve after executing this color adjustment, refer to the following: Color Registration Procedure (page 10-20) When first installing the machine or moving it to a new location, color drift during printing may occur. Use this function to correct the color position of each of cyan, magenta and yellow to resolve color drift. Color Registration Procedure (page 10-20) Restart the CPU without turning the power switch off. Use this to deal with any unstable operation by the machine. (Same as the computer restart.) Settings for machine maintenance and inspection. This menu is primarily used by service technicians to perform maintenance. 8-26