Kyocera ECOSYS P6035cdn ECOSYS P6035cdn Operation Guide - Page 172

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration NW User Property (Obtain Network User Property) Set the required information to obtain the network user property from the LDAP server. NOTE • This setting only appears when the "Login Type" of "User Login" is set to [Netwk Authentic.] and the "Server Type" is set to [NTLM] or [Kerberos]. Enabling User Login Administration (page 9-3) • Setting to obtain network user information is performed from the operation panel. The details of the information to be obtained should be set with Command Center RX. Command Center RX User Guide 1 Display the screen. 1 [Menu] key > [▲] [T] key > [User/Job Account] > [OK] key NOTE If the login user name entry screen appears during operations, enter a login user name and password, and select [Login]. For this, you need to login with administrator privileges. The factory default login user name and login password are set as shown below. Login User Name: 3500 Login Password: 3500 2 key > [User Login Set.] > [OK] key 2 Configure the settings. [▲] [T] key > [NW User Property] > [OK] key The setting items are as follows. Item Off/On Authenticat Type Descriptions Set whether or not network user information is acquired. Value: Off, On Set the authentication method. Value: Simple, SASL 9-10