Kyocera ECOSYS P6035cdn ECOSYS P6035cdn Operation Guide - Page 198
Troubleshooting > Troubleshooting, Unblock, Adjust/Maint., Service Setting, ColorCalibration
View all Kyocera ECOSYS P6035cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
Troubleshooting > Troubleshooting Symptom Printouts are curled. Checkpoints Is the paper damp? Corrective Actions Replace the paper with new paper. Reference Page page 3-2 Cannot print. Cannot print with USB memory. USB memory not recognized. Is the machine plugged in? Is the machine powered on? Are the USB cable and network cable connected? Is the USB host blocked? ― Dirt on the top edge or back Is the interior of the machine dirty? of the paper. Plug the power cord into an AC outlet. ― Turn on the power switch. page 2-8 Connect the correct USB cable and network cable securely. page 2-6 Select [Unblock] in the USB host settings. page 8-24 Check that the USB memory is securely ― plugged into the machine. Clean the interior of the machine. page 10-2 Part of the image is ― periodically faint or shows white lines. ― Skewed-color printout. ― ― Colors appear different than you anticipated. The previous image remains ― and lightly printed. Open and then close the rear cover. page 2-2 Select the [Menu] key > [Adjust/Maint.] ― > [Service Setting] > [MC] and decrease the adjustment value. Decrease the adjustment value 1 level at a time from the current value. If there is no improvement after the value is decreased by 1 level, decrease by 1 level again. If there is still no improvement, return the setting to the original value. Run [ColorCalibration]. page 10-20 Run [Color Regist.]. page 10-20 When printing from a computer ― Adjust the color using the printer driver. Select the [Menu] key > [Adjust/Maint.] ― > [Service Setting] > [MC] and increase the adjustment value. Increase the adjustment value 1 level at a time from the current value. If there is no improvement after the value is increased by 1 level, increase by 1 level again. If there is still no improvement, return the setting to the original value. 10-11