Kyocera ECOSYS P6035cdn ECOSYS P6035cdn Operation Guide - Page 47
Command Center RX User Guide, Default Gateway
![]() |
View all Kyocera ECOSYS P6035cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Installing and Setting up the Machine > Default Settings of the Machine 6 Set the subnet mask. NOTE You can set any value between 000 and 255. Use the numeric keys or select the [▲] or [▼] key to enter a number. Select the [◄] or [►] key to move the position being entered, which is shown highlighted. 7 Select the [OK] key. 8 key > [Default Gateway] > [OK] key 9 Set the default gateway. NOTE You can set any value between 000 and 255. Use the numeric keys or select the [▲] or [▼] key to enter a number. Select the [◄] or [►] key to move the position being entered, which is shown highlighted. 10Select the [OK] key. IMPORTANT After changing the setting, restart the network from System Menu, or turn the machine OFF and then ON. Restart Network (page 8-19) NOTE The network can be configured from the computer by using Command Center RX. Command Center RX User Guide 2-16
![](/manual_guide/products/kyocera-ecosys-p6035cdn-ecosys-p6035cdn-operation-guide-8583e01/47.png)