Kyocera ECOSYS P6035cdn ECOSYS P6035cdn Operation Guide - Page 203

Troubleshooting > Troubleshooting M Message Checkpoints Corrective Actions Reference Page Machine failure. ― Call service. An error has occurred in the - machine. Make a note of the error code displayed on the message display, and contact your service representative. Memory is full. ― Print job cannot be processed completely.*1 Unable to continue the job as the memory is used up. The print job cannot be processed completely. Select [OK] to cancel the job. page 11-4 *1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details on Auto Error Clear, refer to the following: Auto Err. Clear (page 8-16) N Message No multi copies. Press [OK]. Non-genuine Toner. Press [Help]. Checkpoints ― Is the installed toner container our own brand? Corrective Actions Reference Page Multi copies cannot be printed ― because RAM disk is disabled or the SSD is not installed. The job is canceled. Select [OK]. Try adding more memory or installing SSD, and configuring the RAM disk settings. The manufacturer assumes no ― responsibility for damage caused by a non-genuine toner. We recommend that you only use genuine toner containers. When you want to use the toner container currently installed, select the [OK] key and the [Cancel] key simultaneously for 3 seconds or more. P Message Paper jammed at MP ― tray. Paper jammed in Cassette # Paper jammed in rear cover #. Paper jammed in the back of Cassette 1. Checkpoints Corrective Actions Reference Page If a paper jam occurs, the machine will stop and the location of the jam will be indicated on the screen. Leave the machine on and select [Help]. Follow the instruction to remove the jammed paper. page 10-25 10-16