Kyocera ECOSYS P6035cdn ECOSYS P6035cdn Operation Guide - Page 50

Installing and Setting up the Machine > Energy Saver function Sleep Level (Energy Saver and Quick Recovery) (models except for Europe) For sleep level, you can toggle between the following two modes: Energy Saver mode and Quick Recovery mode. The default setting is Energy Saver mode. Energy Saver mode reduces power consumption even more than Quick Recovery mode, and allows Sleep Mode to be set separately for each function. The ID card cannot be recognized. NOTE If the optional Network Interface Kit is installed, this function will not be displayed. To resume, select the [OK] key on the operation panel. If print data is received during Sleep, the machine automatically wakes up and starts printing. Follow the steps below to select the sleep level and use Energy Saver mode for each function. 1 Display the screen. [Menu] key > [▲] [T] key > [Device Common] > [OK] key > [▲] [T] key > [Timer Setting] > [OK] key > [▲] [T] key > [Sleep Level Set.] > [OK] key > [▲] [T] key > [Sleep Level] > [OK] key 2 Select the Sleep level. [▲] [T] key > [Quick Recovery] or [Energy Saver] > [OK] key When [Energy Saver] is set, next go on to set whether or not to use Energy Saver mode for each function. 3 Set the Sleep rule. 1 [▲] [T] key > [Status] > [OK] key 2 Select the function to be set, and select the [OK] key. [Card Reader] is displayed when the optional Card Authentication Kit is activated. 3 [▲] [T] key > [Off] or [On] > [OK] key Repeat steps 3-2 to 3-3 to set for a different function. 2-19