Kyocera FS 1700 FS-1700/3700 Users Manual - Page 18
Memory Expansion Installation, Removing the Main Circuit Board
View all Kyocera FS 1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
1.7. Memory Expansion Installation 1.7. Memory Expansion Installation In this section is explained how to expand the printer's memory. Expanded printer memory enables you to print more complex pages, download more fonts, and define more macros. It begins by explaining how to remove the main circuit board from the printer, and explains *how to install a SIMM (single in-line memory module) on the main circuit board. The expansion memory should be installed only by a Kyocera authorized dealer or Kyocera certified technician. Kyocera shall not be liable for damage due to improper installation of the expansion memory. The minimum memory requirements for the printer with various options installed are listed in the table below. Please refer to this table when expanding the printer's memory. Printing condition HP LaserJet 4 Plus only HP LaserJet 4 Plus, duplex mode = on HP LaserJet 4 Plus/KPDL, duplex mode = None HP LaserJet 4 Plus/KPDL, duplex mode = on HP LaserJet 4 Plus/KPDL, resource protection, duplex mode = None, HP LaserJet 4 Plus/KPDL, resource protection, duplex mode = on, Resolution 300 dpi 600 dpi 2 MB 2 MB 2 MB 3 MB 2 MB 3 MB 3 MB 5 MB - 10 MB - 14 MB Removing the Main Circuit Board The main circuit board of the printer is equipped with two sockets for memory expansion. Expansion memory is available in the form of a SIMM. * The following instructions are intended for the technician only. Notes on Handling the Main Circuit Board and SIMM Protect the electronics by taking these precautions: F Before touching the main circuit board, touch a water pipe or other large metal object to discharge yourself of static electricity. While doing the work, it is recommended F that you wear an antistatic wrist strap. Touch the main circuit board and SIMM only by the edges. 1-23