Kyocera FS 1700 FS-1700/3700 Users Manual - Page 72
It is necessary to clean the inside of, the printer after replacing the toner
View all Kyocera FS 1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
5. The bottom of the toner container is sealed with a plastic strip. Carefully pull the sealing strip off the toner container, making sure not to leak any toner. Dispose of the sealing strip. 6. Install the toner container on the developer as shown in the diagram. Be sure to peel off the seal on the toner container before mounting the toner container on the developer unit. 7. When the toner container is installed correctly on the developer. 4.1. Toner Kit Replacement Sealing Strip 8. Push the top of the toner container unit ("PUSH ") HERE until it locks in. Make sure that the toner container is properly locked in the printer. 9. Close the top cover by pressing the arrowed part in this diagram. It is necessary to clean the inside of the printer after replacing the toner container. If the toner container is replaced when the message Replace Toner Clean printer is displayed, the message Clean printer ..press CONT will be displayed after replacement. After cleaning the inside of the printer (See Section 4.2. Cleaning), the message will disappear when the CONT key is pressed, and the printer will be ready for printing. 4-3