Kyocera FS 1700 FS-1700/3700 Users Manual - Page 22
Testing the Expansion Memory, STATUS
View all Kyocera FS 1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
1.7. Memory Expansion Installation Testing the Expansion Memory After you have finished installing SIMMs in the printer, test the printer to see if the installation has been successful. To test the expansion memory, proceed as follows: 1. Make sure the power switch is off. Plug the power cord into the printer and turn power on. 2. When the printer is on-line, press the STATUS key. 3. If the installation has been successful, the Total memory (Memory Allocation) of the status page will show the expanded memory size corresponding to the amount of memory added. (The factory installed memory size is 2 MB.) 1-27
Testing the Expansion Memory
After you have finished installing SIMMs in the printer, test the printer to see if the installation
has been successful.
To test the expansion memory, proceed as follows:
1.
Make sure the power switch is off. Plug the power cord into the printer and turn power
on.
2.
When the printer is on-line, press the
STATUS
key.
3.
If the installation has been successful, the
Total memory
(Memory Allocation) of the
status page will show the expanded memory size corresponding to the amount of mem-
ory added. (The factory installed memory size is 2 MB.)
1.7. Memory Expansion Installation
1-27