Kyocera FS 1700 FS-1700/3700 Users Manual - Page 76
Cleaning the Grid, The grid cleaner pad is impregnated, with water. Perform the following
View all Kyocera FS 1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Cleaning the Grid 1. Take the grid cleaner from protective bag in the new toner kit, and remove the cap. The grid cleaner pad is impregnated with water. Perform the following cleaning procedure before the pad dries. 2. Attach the grid cleaner to the printer with the pad uppermost, as shown in the diagram. Protective Bag 4.2. Cleaning Cap Grid Cleaner 3. After attaching the grid cleaner, repeat the action of slowly pulling out and then pushing back in the main charger unit at least 5 times. It is easier to pull out the main charger for the first time if it is raised slightly, as shown in the figure. (3) The grid part underneath the main charger is cleaned by this procedure. 4. When the grid is clean, remove the grid cleaner from the printer and dispose of it. The grid cleaner is not re-usable. 5. After cleaning the charger wire, push the cleaning knob all the way in and close the side cover. Main Charger Unit Grid Cleaner (1) (2) 4-7