Kyocera FS 1700 FS-1700/3700 Users Manual - Page 82
Faint or blurred printing, Grey background, See
View all Kyocera FS 1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Faint or blurred printing 5.4. Print Quality Problems Check the control panel. If the Toner low TK-20 Clean printer message is displayed and the indicator is flashing, install a new toner kit. See Section 4.1. Set the print density from the control panel to a higher level than the current setting. See Section 2.8. Set the control panel Paper type setting to Thick . Check the Ecoprint setting. See Section 2.6. Grey background Check the control panel. If the Toner low TK-20 Clean printer message is displayed and the indicator is flashing, install a new toner kit. See Section 4.1. Clean the main charger wire. Open the printer's side cover. Pull the green main charger wire cleaning knob slowly in and out a few times. See Section 4.2. Check the main charger unit installation. Open the printer's side cover. Remove the main charger unit half way out, then reinstall it properly. See section 4.2. Call for the assistance of a service person. If the above checks do not solve the problem, call for the assistance of a service person. 5-5