Kyocera FS 1700 FS-1700/3700 Users Manual - Page 81
Dropouts, horizontal streaks, stray dots, Black or white vertical streaks, Print Quality Problems
View all Kyocera FS 1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
5.4. Print Quality Problems Dropouts, horizontal streaks, stray dots Clean the charger wire. Open the printer side cover. Pull the green main charger wire cleaning knob slowly in and out a few times. See Section 4.2. Note the spacing of the defects. If the defects occur at regular intervals of 60.6 mm (2.4 inches), the problem may be a dirty transfer roller. Call for the assistance of a service person. If the defects occur at regular intervals of 94 mm (3.7 inches), the problem may be a damaged drum unit or fuser roller. Call for the assistance of a service person. Black or white vertical streaks Check the control panel. If the Toner low TK-20 Clean printer message is displayed and the indicator is flashing, install a new toner kit. See Section 4.1. Clean the charger wire. Open the printer side cover. Pull the green main charger wire cleaning knob slowly in and out a few times. See Section 4.2. Call for the assistance of a service person. If the above checks do not solve the problem, call for the assistance of a service person. 5-4