Kyocera FS 720 FS-720 Operation Guide - Page 28
Flip on Long Edge, Print on Both Sides
View all Kyocera FS 720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Printing NOTE: Ensure Print Instructions is selected to receive the instruction sheet. Continue to use the sheet until you are familiar with this feature. 1 Ensure Cassette 1 is selected as the Media Source in the print Properties dialog box. 2 Select Print on Both Sides (Manual Duplex). Select Gutter Settings and enter the value required for each edge. Gutter width range: 5.00 to 25.4 mm (0.20 to 1.00 inch). Select Reduce Image to fit as required. Use the Duplex Details option to select Flip on Long Edge for binding on the long edge or Flip on Short Edge for binding on the short edge. Select Print Instruction Page to receive the reloading instructions. 3 Select OK to return to the Print dialog box and select OK to start printing. A Manual Duplex instruction message box displays. 4 Remove all the even pages (including the instruction sheet) from the output tray and load them into the paper cassette, with the instruction sheet facing up and the arrows pointing toward the printer. NOTE: Nothing will be printed on the instruction sheet. If the paper is curled, straighten it out before loading the paper in the cassette. 5 Select OK on the Manual Duplex instruction message box. All the odd pages will be printed. 16 OPERATION GUIDE