Kyocera FS 720 FS-720 Operation Guide - Page 32
Maintenance, OPERATION GUIDE, Drum Unit, Registration Roller, Transfer Roller, Charger Cleaner
View all Kyocera FS 720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Maintenance 4 Place the Drum Unit flat on a clean, level surface. IMPORTANT: Do not place the Drum Unit on end. 5 Use a clean, lint free cloth to clean dust and dirt away from the metal Registration Roller (metal) c. d IMPORTANT: Take care not to touch the Transfer Roller (black) d during cleaning. c 6 Slide the Charger Cleaner (green) back and forth 2 or 3 times to clean the charger wire, then return it to its original position. 7 When cleaning is complete, return the Drum Unit to its position, aligning the guides at both ends with the slots in the printer. 8 Insert the Developer Unit together with the Toner Container, back into the machine. Close the Top Cover. 20 OPERATION GUIDE
Maintenance
20
OPERATION GUIDE
4
Place the
Drum Unit
flat on a
clean, level surface.
IMPORTANT:
Do not place the
Drum Unit
on end.
5
Use a clean, lint free cloth to clean
dust and dirt away from the metal
Registration Roller
(metal)
.
IMPORTANT:
Take care not to
touch the
Transfer Roller
(black)
during cleaning.
6
Slide the
Charger Cleaner
(green)
back and forth 2 or 3 times to
clean the charger wire, then return
it to its original position.
7
When cleaning is complete, return
the
Drum Unit
to its position,
aligning the guides at both ends
with the slots in the printer.
8
Insert the
Developer Unit
together
with the
Toner Container
, back
into the machine.
Close the
Top Cover
.