LG 26LX1D Owners Manual - Page 110

Reference P ro g ra m m ing t he Re m ote I_ The remote control is a multi-brand or universal remote control• It can be programmed to operate most remote-controllable devices of other manufacturers• Note that the remote control may not control all models of other brands• Test your remote control• To find out whether your remote control can operate the component without programming, turn on the component such as a VCR and press the corresponding MODE button (VCR) on the remote control, while illuminating on the selected component• Test the POWER button to see if the component responds properly• If not, the remote requires programming to operate the device• 2 Turn on the component to be programmed, then press the correspond- ing MODE button on the remote control• 3 Press the MENU and MUTE buttons simultaneously for 2 seconds, the button selected component lights on the remote control• If you don't press any button for 20 seconds, the button selected component will turn off on the remote control• At a moment, you have to repeat from step 2. 4 Enter a code number using the number buttons on the remote• When pressing the button, the light is blinked at a time. Programming code numbers for the corresponding component can be found on the following pages• Again, if the code is correct, the device will turn off. 5 Press the MENU button to store the code. After blinking twice, this code _sstored• 6 Test the remote control functions to see if the component responds properly. If not, repeat from step 2. 110