LG 42LH250H Owners Manual - Page 135
Installer
View all LG 42LH250H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Installer Menu Installer Menu Items 035 through 118 Menu item 035 038 039 040 046 047 053 069 Function COMPPORTEN. YPrPb EN. REARAUX EN AUTOCAMPORT STRTAUX SRCE AUX STATUS DIS. CH-TIME EN. CH-T COL. Value Range Default Value 0/ 1 1 0/ 1 1 0/ 1 1 0/ 1 1 1 - 6, 255 6 0/ 1 0 0/ 1 0 0/ 1 1 Brief Description of Function and Comments Set to 0 to disable HDMI 1. Set to 1 enable HDMI 1 Set to 1 to enable display panel Component Video 1 input Jacks. Set to 1 to enable display panel Video 1 input Jack, Set to 1 to automatically switch to Camport. If set to 1, STRTAUX SRCEcannot be set to 2. Sets the starting AUX source. Set to 1 for M.P.I. AUX source to be reported as a channel number instead of Channel O. Set to 1 to disable Channel-Time display. Set to 1 to enable custom color for the Channel-Time display. 071 BCK. CH-TIME 073 CH NOTAVBLE 075 REVERTCH 078 UPN MSB 079 UPN MSB-1 080 UPN MSB-2 081 UPN LSB 082 CHKSMERROR 083 HANDSHKTIME 084 PERMANENTBLK 087 REARROB EN. 088 EN NOISEMUTE 090 KEYLOCK 091 YPrPB2 EN 093 RJP AVAILABLE 094 SAP MENUEN 096 DEF.ASP. RATIO 098 STARTGEMCH 099 BACKLIGHTING 102 ATSCBAND 103 ATSCTUNE MODE 104 STARTMINOR CH 106 ASP RATIO LOCK 116 VIDEO MUTE EN 117 FACTDEFAULT 118 POWERSAVING 0-7 2 0/ 1 0 0/ 1 0 0 - 255 0 0 - 255 0 0 - 255 0 0 - 255 0 0/ 1 1 0-5 5 0/ 1 0 0 / 2 / 18 2 0/ 1 1 0/ 1 0 0/ 1 1 0 12 5 6 0 0/ 1 1 0 -- 4 2 0 - 135, 255 255 1 - 100 200 101 - 200, 255 0-4 4 0/ 1 1 0 - 255 0 0/ 1 0 0/ 1 0 0/ 1 0 1, 3, 7 3 Note 1: Dependent on item 093 RJP Available setting. Choosescustom background color for the Channel-Time display. If set to 1 and channel override is O, "NOT AVAILABLE"message is displayed when directly accessing a channel not in the favorite channel list. If set to 1 and loss of M.P.I. communication occurs, TV tunes to Start Channel. Llser programmable number, most significant byte. Llser programmable number, most significant byte - 1. Llser programmable number, most significant byte - 2. User programmable number, least significant byte. Enforces rigid M.P.I. checksum. Relaxes M.P.I. timing to be compatible with PC based Windows-controlled systems. Removes block hours setting for Parental Control and makes block permanent, Set to 0 to disable ROB1. Set to 2 to enable for PC and Auto Configure always enabled, Set to 18 to enable for PC and Auto Configure one time only after AC ON. If set to 1, mutes audio if no signal is present. If set to 1, keyboard is locked out, IR is still functional. Set to 1 to enable HDMI-2 input, Set to 0 to disable. Set to 1, 2, 5 or 6 for HDMI or DVI mode. (See detailed descriptions.) Set to 0 to disable feature on Function menu. Set to 1 to enable feature on Function menu. Sets default aspect ratio at power up. See detailed descriptions and item 106. Sets the stating Gem channel, 255 last channel at power Off. Sets the brilliance of the TV picture backlighting. Settings above 101 control dynamic back lighting and disable power saving mode.. Selects ATSCband. Default 01 for physical channel scan, Set to 0 for Virtual Channel scan, Selects Minor start channel. Set 0 for NTSC. Not O, sets Minor channel number. To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle. Set to 0 for normal, set to 1 for Blank. 0 Normal. 1 Loads presets of all above settings. Set to 1 to be powered at b-Lan module. Set to 3 to bo powered at b-Lan module only when TV is powered on. Set to 7 to be not powered at b-Lan module. 206-4118 PA G E 2 7