LG 42LH250H Owners Manual - Page 137

Installer Menu 011 - KEY DEFEAT (Keyboard Defeat) If set to 1, key defeat prevents the end user from accessing the onscreen menus with the display front panel--MENU, SELECT,and Left / Right arrow keys do not function. If set to O, those keys do function. NOTE: The menus can always be accessed by pressing MENU on the remote. 015 - SLEEPTIMER If set to 1, the SLEEPTIMERfeature may be used. If set to O, the Sleep Timer is not available. 016 - EN TIMER (Enable On/Off Timers) * If set to 1, Timer function is available to user and enabled continuously. Set to 0 to disable On/Off Timers. (Clock must be set in order to use Timers.) 017 - ALARM * Gives the installer the option of making the Alarm function available to the end user. If set to 1, Alarm function is available to end user. Set to 0 to disable the Alarm function. NOTE: Clock must be set before the Alarm function will work. 021 - V-CHIP (Parental Control) * Set to 1 to activate V-Chip (Parental Control); have it available to end user to filter and control or otherwise restrict programming content that can appear. Set to 0 to turn V-Chip feature Off, not available to user; no programming restrictions can be set. 022 - MAX BLK HRS (Maximum Block Hours) * Sets hours from 0 to 99 for the maximum V-Chip (Parental Control) block hours. Default setting is for 12 blocking hours. 023 - CAPTION LOCK Set to 1 to restore previous caption On/Off state after turn Off. If set to O, captions are always Off at turn On. 028 - CH. OVERIDE(Channel Override) If set to 1, the user can select channels with either Channel up/down or by direct keypad entry. If set to O, only those channels that are entered for scanning can be selected. 029 - OLD OCV (On Command Video _M) Set to 1 for operation with systems from On Command Corporation. 030 - ACK MASK M.P.I. Communication Parameter. Leave at default setting unless changed by Pay-Per-Viewprovider. When set to 1, changes M.P.I. for some OCVboxes. * Only affects Function Menu if enabled by some PPV providers. 031 - POLL RATE M.P.I. Communication Parameter. Selects Poll Rate for M.P.I. Leave at default setting unless changed by Pay-Per-View provider. Step size of 16 ms. 032 - TIMING PULSE M.P.I. Communication Parameter. Leave at default setting unless changed by Pay-Per-View provider. Sets baud rate. Step size of 4.3 uS. 034 - CAMPORTEN. (Camera Port Enable) Set to 1 to enable Video 2 input on display panel. If set to O, Video 2 input on display panel is not functional. NOTE:S-Video overrides Videojack. 035 - COMPPORT EN. (Computer Port Enable) Enable/disables display panel HDMI1 input jack. Set to 0 to disable HDMI 1. set to 1 to enable HDMI 1. NOTE: The setting above is ignored if Installer item 093 RJP AVAILABLE, is set to 1. 038 - YPrPb EN. (Rear Component Video Enable) Set to 1 to enable display panel rear Component Video input jacks. Set to 0 to disable display panel rear Component Video input jacks. 039 - REAR AUX EN. (Rear Aux Enable) Set to 1 to enable display panel rear AUX (Video 1) input. Set to 0 to disable display panel rear AUX (Video 1) input. Note: S-Video overrides Video. 040 - AUTO CAMPORT Set to 1 to automatically switch to Camport when equipment nected to front Video input. Set to 0 to disable front Video automatic source selection. is con- NOTE: If set to 1,093 RJP Available is automatically set to O. 046 - STRTAUX SRCE(Start Aux Source) Sets the starting AUXsource. At power up, TVwill tune to starting Aux source if item 004 Start Channel is set to O. If item 093 RJP Available is set to 0 and item 040 Auto Camport is set to O: 1 = Video 1 4 = RGB 255 = Last Aux 2 = Video 2 5 = HDMI 2 3 = HDMI 1 6 = Component If item 093 RJP Available is set at 1: 2 = Video 2 5 = HDMI 2 6 = Component If item 040 Auto Camport is set to 1: 1 = Video 1 5 = HDMI 2 3 = HDMI 1 4 = RGB 6 = Component 206-4118 PA G E 2 9