LG DLG2532W Owners Manual - Page 27

Manual Preset Cycle Settings Manual Dry Cycles L_d Default Time* SPEED DRY Tu SMALL LOADS FRESHEN UP Remove Wdnkles AIR DRY 25 Medium 20 Air Dry 3,3 You can customize your cycles by selecting options. Use Modifiers to select temperatures for the Manual Cycles. Press TEMP. CONTROL until the desired temperature setting glows. Temperature modifiers cannot be used with the Sensor Dry Cycles. @ HIGH MEDIUM @ HIGH @ MEDIUM o LOW @ ULTRA LOW TEMR _t'TROL BEEP Vw_IN_ CARE Damp Dry Beep Select DAMP DRY BEEP to alert you that your clothes are approximately 80% dry. This is useful when you want to remove lightweight items in a mixed load to prevent overdrying or remove partially dry items that may need ironing. NOTE: The Damp Dry Beep is only available with the Sensor Dry Cycles. WRINKLE CARE WRINKLE CARE prevents wrinkles that form when you cannot unload the dryer promptly at the end of a cycle. During this option, the dryer will periodically tumble. [] Press WRINKLE CARE to get up to 3 hours of heat-free, periodic tumbling at the end of a cycle. [] Stop WRlNKLE CARE at any time by pressing WRlNKLE CARE or opening the dryer door. NOTE: If you do not select WRINKLE CARE, the dryer stops after cool down. When using Air Dry This chart shows examples of items that can be dried using AIR DRY. Ty_ of Load Default Time* Foam rubber-pillows, padded bras, stuffed toys 20 - 30 Plastic-Shower curtains, tabl_lothes 20 - 30 Rubber-backed rugs 40 - 50 Olefin, polypropylene, sheer nylon 10 - 20 Reset cycle to complete drying, if needed. [] Check to see that coverings are securely stitched. [] Shake and fluff pillows by hand periodically during the cycle. [] Dry item completely. Foam rubber pillows are slow to dry. NOTE: Air Dry is not avaiiable with Sensor Dry Cycles