LG L26W56WA Operation Guide - Page 38

Following is the Commerciat Mode Operation Setup. r Operating Ins_|[er Menu To set up the controls for the TV you will need to know how to enter the L26W56XA Insta|ler menu and make changes to the default values as required. If necessa_, familiarize yourself with the L26W56XA Installer menu and how to make and save changes in the menu, Op_ona| Instat[er Remote You wit| need an Instat|er remote control shown to the right, similar to the one The TV's c[onable features need to be set up before 25°5 + Menu isdone. This is a cfitica| step. If the Master TV display panel's c[onab[e features |ike: Clock Set, adding channel icons and channe| [abels, etc_ are not done properly, then the c|oned L26W58X TVs will all have problems. For example, do not do 2°5°5 + Menu more than once or the TV setup will become corrupted, If you need to start the procedure over, then begin by setting installer item 117 to 001, and pressing Enter to reset the TV to default values in the installer menu. You can do 2-5_4 + Menu mode more than once but this mode is limited to only editing channel icons and channel labels. Refer to the appropriate section in the Manual for other TVfeatures: Pi_ure, Sound etc. LT2002 Clone Programmer As the cloning procedure is being performed, specific steps need to be done at the indicated times to achieve the desired result, Be sum to do each cloning task as indicated. If a procedure or step is left out or not p..e..r.f.o..r..m...e.d corre_ly, then the TV setup will be wrong and cloning may not work, At each step, pay a_ention to assure the TV screen shows the proper message(s) when cloning, If the message indicated does _ not appear, there is a problem with that step ...... and cloning may not be successful Cloning is only possible when the signal source is an Ana[oo channel, not a digital channel. QuickSet # Prograrnrner L 7'2002 J Typical InstaL|er Menu PAGE 38