LG N2B1 Owner's Manual (English) - Page 31
<NAS Wakeup>, <Choose a NAS> - nas server
UPC - 058231293715
View all LG N2B1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2. LG Network Storage Installation Web menu is used to access the web page. Network folder is used to open the network folder. Double-clicking the left button of the mouse will open the network folder. This is used to log on to the FTP server. The NAS Detector program is run to change the IP address of the LG Network Storage. This menu will properly function only after the NAS Detector has been completely installed. This function is used to change the LG Network Storage mode from maximum energy save mode to normal mode. This procedure usually takes approximately 1 minute. Using one LG Network Storage will automatically set up an IP address for the NAS monitor. However, using multiple LG Network Storages may forward too many messages to the NAS Monitor while not knowing to which LG Network Storage the message is being sent at the selection of a menu. Therefore, designating one LG Network Storage may allow information for that specific LG Network Storage to be processed. This menu shows the last message sent. This menu hides the message sent from LG Network Storage. 31