Lantronix MatchPort b/g MatchPort b/g - Integration Guide - Page 12
WLAN Input/Output, MatchPort b/g, Pin Number, Pin Function
View all Lantronix MatchPort b/g manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2: Description and Specifications Figure 2-6. Separate RS-422 Transceivers for 2-Wire and 4-Wire Setups WLAN Input/Output The following table displays the WLAN LED functions. Table 2-4. WLAN Signals Pin Number Pin Function 22 WLAN LED MatchPort b/g Output WLAN LED can be used to drive an external LED to monitor the activity of the radio. The output is active when the receiver and or transmitter are on. The output is active low and can drive an LED with 10mA. The LED shall be connected between the output and 3.3V with a series resistor of 220 ohm. Note: If you have questions or concerns, please contact Lantronix Technical Support at (800) 422-7055 (US only) or (949) 453-7198. If power management is disabled, and when the unit is associated with a network, the receiver will always be on and thus any LED output, that indicates the receiver or transmitter being on will be active continuously. MatchPort b/g Integration Guide 12