Lantronix MatchPort b/g MatchPort b/g - Integration Guide - Page 7

2: Description and Specifications The MatchPort b/g wireless embedded device server is a complete network-enabling solution based on the IEEE 802.11b/g wireless standard, with 802.11i (PSK), WPA, and WEP capabilities. MatchPort b/g allows Original Equipment Manufacturers (OEMs) to add wireless connectivity to their products by incorporating it onto a circuit board with minimal engineering. The MatchPort b/g functions independently of a PC, providing an integrated solution that combines a processor, memory, 802.11b/g transceiver, a 10/100 Mbps Ethernet transceiver, and two high-speed serial ports into a single compact module. It includes a wireless connection, an operating system, an embedded Web server, and a full TCP/IP protocol stack. In addition, the MatchPort b/g sends email alerts and supports numerous other network communication protocols, including ARP, UDP, TCP, ICMP, Telnet, AutoIP, DHCP, HTTP and SNMP. MatchPort b/g Overview The MatchPort b/g contains Lantronix's own DSTni controller with 256 Kbytes of internal zero wait state SRAM and 16 Kbytes of boot ROM. The MatchPort b/g also contains the following:  Two 3.3 volt, CMOS level, asynchronous serial interfaces (5 volt tolerant)  Support for RS-232 and RS-485 up to 921 Kbps  16 Mbit flash memory  26 (low), 48 (regular), 88 (high) MHz clock  802.11b/g interface  10/100 Mbps Ethernet transceiver (requires external magnetics and RJ45)  8 configurable pins The MatchPort b/g requires +3.3-volt power and is designed to operate within a temperature range of -40ºC to +70ºC. MatchPort b/g Integration Guide 7