Lantronix MatchPort b/g MatchPort - DemoKit Quick Start Guide - Page 6
Option 3: Wireless connection via Wireless card (factory default)
View all Lantronix MatchPort b/g manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
5. Select the appropriate power plug adaptor for your geographical location. Insert it into the slot on the Universal Power Supply; then plug the power supply into an outlet. 6. Connect the output plug of the power supply to the MatchPort Evaluation Board. 7. Move the power switch on the Evaluation Board to ON. This is the last step in 'connection.' The MatchPort is ready for configuration 8. Continue with Install DeviceInstaller on p. 10. Option 3: Wireless connection via Wireless card (factory default) 1. Ensure the wireless card is running correctly. Change the wireless card configuration as follows: a. Set Network name (SSID) to LTRX_IBSS. b. Select AdHoc network. c. Disable all wireless security (no encryption, no/open authentication). 2. Select the appropriate power plug adaptor for your geographical location. Insert it into the slot on the Universal Power Supply; then plug the power supply into an outlet. 3. Connect the output plug of the power supply to the MatchPort Evaluation Board. The final setup should look like this: Wireless Connection 4. Move the power switch on the Evaluation Board to ON. This is the last step in 'connection.' The MatchPort is ready for configuration 5. Continue with Install DeviceInstaller on p. 10. MatchPort® Embedded Device Server Demonstration Kit Quick Start Guide 6