Lantronix UDS-10 UDS-10 / UDS100 - User Guide - Page 30
Configuring the UDS Using Telnet or the Serial Port, UDS10/UDS100 User Guide, Retrycounter
View all Lantronix UDS-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Configuring the UDS Using Telnet or the Serial Port Figure 5-6. Hostlist Option UDS10/UDS100 User Guide To use the hostlist option, follow these steps: 1. To enable the hostlist, enter a Connect Mode of 0x20 (2X). The menu shows you a list of current entries already defined in the product. 2. To delete, modify, or add an entry, select Yes. If you enter an IP address of 0.0.0.0, that entry and all others after it are deleted. 3. After completing the hostlist, repeat the previous step if necessary to edit the hostlist again. 4. For Retrycounter, enter the number of times the Lantronix unit should try to make a good network connection to a hostlist entry that it has successfully ARPed. 5. For Retrytimeout, enter the number of seconds the unit should wait before failing an attempted connection. Modem (Emulation) Mode: In Modem Mode, the unit presents a modem interface to the attached serial device. It accepts AT-style modem commands, and handles the modem signals correctly. Normally there is a modem connected to a local PC and a modem connected to a remote machine. A user must dial from the local PC to the remote machine, 30