Lantronix UDS-10 UDS-10 / UDS100 - User Guide - Page 38
Factory Default Settings, Channel 1 Configuration Defaults, Expert Settings Defaults - factory reset
View all Lantronix UDS-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Configuring the UDS Using Telnet or the Serial Port UDS10/UDS100 User Guide Factory Default Settings Select 7 to reset the unit's serial port to the factory default settings. The server configurations (IP address information) remain unchanged. The specific settings that this option changes are in the following list: Channel 1 Configuration Defaults Baudrate I/F Mode Own TCP port number Connect Mode Hostlist retry counter Hostlist retry timeout Start character All other settings 9600 4C (1 stop bit, no parity, 8 bit, RS-232C) 10001 C0 (always accept incoming connection; no active connection startup) 3 250 (msec) 0x0D (CR) 0 Expert Settings Defaults TCP keepalive ARP cache timeout 45 (seconds) 600 (seconds) Security Settings Defaults SNMP SNMP community name Telnet setup TFTP download Port 77FEh Web Server ECHO Encryption Enhanced password Enabled public Enabled Enabled Enabled Enabled Disabled Disabled Disabled Exit Configuration Mode To exit Setup Mode: To save all changes and reboot, select 9. All values are stored in nonvolatile memory. To exit the configuration mode without saving changes or rebooting, select 8. 38